Phase Technology Speaker SM500i User Manual

Surface-Mount Speaker  
SM500i  
Technical Information for System Engineers  
Key Features  
• BroadBeam® waveguide technology  
delivers a consistent dispersion pattern  
up to 10 kHz for maximum coverage  
area per speaker (EASEdocumented).  
• One 133 mm (5.25 in) polypropylene  
woofer and one 25 mm (1.0 in) convex  
aluminum tweeter with FerroFluid™  
cooling mounted to a proprietary cast-  
aluminum M5baffle and heat sink.  
Mounting hardware included  
Specifications: SM500i  
System Type  
• 88.5dBAveragesensitivityoffershighoutput  
capabilities&reducedamplificationcosts.  
5.25” Coax, surface-mount, ported (32 Watt transformer  
available for 25/70.7/100 Volt or voice coil/8 Ohm direct)  
Frequency Response (-3 dB)1  
Low Frequnecy (-10 dB)1  
Max. Program Power  
Max. Continuous Power RMS2  
Max. UL Power Rating3  
Max. SPL dB @ 1 M  
Sensitivity dB @ 1W/1M4  
Impedance (nominal)  
Coverage Angle (-6 dB @ 2 kHz)  
Coverage Angle (-6 dB @ 10 kHz)  
Directivity Factor (Q)  
70 Hz - 22 kHz  
45 Hz - 22 kHz  
150 Watts  
75 Watts  
50 Watts  
107.5 dB  
88.5 dB  
8 Ohm (nominal value)  
• Weatherized components for indoor &  
outdoor applications.  
• Includes a tool-free SpeedLevercap-  
tured ball mounting system for fast &  
secure installation. Included accessories:  
Mounting hardware, Euroblock connector  
& terminal weather boot.  
120º  
130º  
• Vertical & horizontal pivoting offer  
precision aiming for indoor & outdoor  
applications.  
3.28 (Averaged 100 Hz - 10 kHz); 4.83 @ 2 kHz  
4.43 dB (Averaged 100 Hz - 10 kHz); 6.84 dB @ 2 kHz  
6-Position rotary switch with voice coil/8 Ohm direct  
Directivity Index (DI)  
Tap Selector  
• Patented ZeroReflectionenclosure  
technology for optimal sound reproduc-  
tion & cabinet rigidity.  
Transformer Taps  
70.7 V Output  
33 W 103.5 dB  
17 W 101.0 dB  
9 W 98.0 dB  
6 W 96.5 dB  
3 W 93.5 dB  
100 V Output  
33 W 103.5 dB  
17 W 101.0 dB  
9 W 98.0 dB  
6 W 96.5 dB  
25 V Output  
5 W 95.5 dB  
2.5 W 92.5 dB  
1.3 W 89.5 dB  
0.63 W 86.5 dB  
• Easy access 6-position selectable tap  
switch for 25, 70.7 and 100 Volt applica-  
tions with voice coil/8 Ohm direct sim-  
plifies ordering and inventory tracking.  
• UL 1480 rev. 5, CE approval (EMC Direc-  
tive 89/366/EEC, EN55020, EN55013) or  
Milspec 810 & IEC529 approval pending.  
Transducers  
Low Frequency Driver  
High Frequency Driver  
Low Frequency Voice Coil  
Crossover Frequency  
1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround  
25 mm (1.0 in) Convex aluminum tweeter with waveguide  
25 mm (1.0 in)  
3 kHz  
• High-quality black or white paint finish.  
Network Type  
Low Pass  
High Pass  
Enclosure Material  
Motor Board  
Grille  
Description  
12 dB per octave, 2nd order  
12 dB per octave, 2nd order  
Injection molded ABS, glass fiber reinforced  
Cast aluminum with integrated heat sink  
Iridite-plated aluminum with powder-coat finish  
4 Pin, 5 mm Euroblock for individual or daisy chain connection  
Black or white  
305.1 mm / 12.01 in  
316.9 mm / 12.48 in  
216.6 mm / 8.53 in  
4.3 kG / 9.5 lbs  
The SM500i is a 5.25” 2-way surface-  
mount speaker with a midsize enclosure  
design that delivers effective low-end  
response (45 Hz) and optimal off-axis  
performance (up to 10 kHz, EASE™  
documented). SoundTube’s proprietary  
BroadBeam® waveguide tweeter  
Inputs  
Colors  
Length (Including Bracket)  
Height  
Weight  
system delivers consistent high-perfor-  
mance audio across operating bandwidth.  
Weight  
Shipping Weight  
10.9 kG / 24 lbs (2 per box)  
The SM500i speaker design incorp-  
orates a low-profile grille, proprietary  
M5motor-board, 6-position tap switch  
with voice coil/8 Ohm direct and mount-  
ing hardware, including a fast Speed-  
Levermounting system.  
Accessories  
Included  
Corrosion-resistant captured ball mount, safety cable,  
Euroblock connector & terminal weather boot  
U-Mount Bracket (AC-SM-UB5), Pole Mount Adaptor  
(AC-SM-PMA5), Bent Shaft (AC-SM-BS5)  
2 Per box, can ship as single  
Optional  
Packaging  
1
2
3
4
Applications  
Frequency response is measured in half space and includes a low-frequency peak > + 3 dB.  
Continuous power rating, EIA-426-B test.  
UL testing specifies band-limited pink noise over the indicated frequency spectrum.  
2.83 Volts at a distance of 1 meter.  
Designed for indoor & outdoor back-  
ground to mid-level SPL surface-mount  
applications, the SM500i includes a  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
© 2005 SoundTube Entertainment, Inc. All rights reserved. REV 08.29.05  
 
Surface-Mount Speaker  
SM500i  
Technical Information for System Engineers  
proprietary captured ball mount-  
ing system with security screw for  
theft prevention. The full frequency  
dispersion pattern (45 Hz – 10 kHz,  
EASEdocumented) and high sensitiv-  
ity (88.5 dB 1W/1M) make the SM500i  
surface-mount speaker ideal for music  
& paging in retail, amusement, restau-  
rant, airports, hotels, schools and casi-  
nos. For applications where additional  
bass is required, SoundTube’s RS801i  
subwoofer provides bass down to 40 Hz.  
including Measured Length Sequence  
(MLS) and Time Delay Spectrometry  
(TDS). Performance, development and  
data acquisition tools include: Gold Line  
TEF 20, CLIO, LMS, LEAP, and propri-  
etary modeling software. EASE™ data  
are acquired through an automated TEF  
20/Outline/EASEinterface.  
P
atented SoundTube  
Technologies  
SoundTube Entertainment is constantly  
developing new technologies that enhance  
audio product performance. SoundTube  
Entertainment innovations are protected  
by multiple U.S. & international patents,  
which explicitly cover SoundTube dome,  
enclosure and dispersion technologies.  
SoundTube Entertainment actively  
EASE™ Data – 3-D polar plots.  
SoundTubeSPEC™ – Proprietary  
SoundTube speaker placement software.  
defends its patents in order to protect  
SoundTube resellers and end users.  
Br  
oadBeam® Wide  
Architectural Specifications  
Technical Data and  
Specification Tools  
Dispersion Technology  
The loudspeaker shall consist of a 133  
More than 3 years in development,  
SoundTube’s proprietary BroadBeam®  
technology incorporates a high-fre-  
quency waveguide mated to a 1” convex  
metal tweeter. BroadBeam® wave-  
guide technology delivers a consistent  
BroadBeam® dispersion pattern across  
the upper registers of the frequency  
spectrum (up to 10 kHz, EASEdocu-  
mented). The result is an audio system  
with fewer speakers, reduced power  
needs, shorter installation time and cost  
savings on shipping & labor.  
mm (5.25 in) low-frequency transducer  
and a 25 mm (1.0 in) high-frequency trans-  
ducer with a frequency-dividing network  
installed in the vented enclosure. The  
low-frequency voice coil diameter shall be  
25 mm (1.0 in).  
Technical Data  
SoundTube Entertainment strives to  
provide complete and effective technical  
information and data to dealers, engineers  
and designers. All data are available  
from SoundTube Entertainment or at  
www.soundtube.com.  
Performance specifications of a typical  
production unit shall be as follows: Use-  
able frequency response shall extend from  
45 Hz – 22 kHz (-10 dB, half space, no  
external equalization). Measured sensitiv-  
ity (2.83 Volt input, 1 meter) shall be at  
least 88.5 dB. The speaker shall have a  
Data Acquisition  
All performance data acquired at  
SoundTube’s Technical Measurement Cen-  
ter (TMC) are analyzed using a variety  
of standard measurement techniques,  
Polar Plots  
Horizontal  
Vertical  
250 Hz  
500 Hz  
1,000 Hz  
125 Hz  
4,000 Hz  
8,000 Hz  
10,000 Hz  
2,000 Hz  
Technical data, EASEplots, SoundTubeSPECsoftware & product downloads available at www.soundtube.com  
 
Surface-Mount Speaker  
SM500i  
Technical Information for System Engineers  
nominal impedance of 8 Ohms and be avail-  
able for 25, 70.7 & 100 Volt modes with voice  
coil/8 Ohm direct. The frequency-dividing  
network shall have a crossover frequency  
of 3 kHz with slopes of 12 dB per octave  
(2nd order) for both low & high pass filters.  
Rated power capacity shall be at least 75  
Watts continuous power (RMS) and conform  
to EIA-426-B testing. Maximum continuous  
output at 1 meter shall be 107.5 dB.  
Mechanical Drawings  
216.6 mm (8.53 in)  
245.9 mm (9.68 in)  
316.9 mm (12.48 in)  
The low-frequency transducer shall have  
a polypropylene cone with butyl rubber sur-  
round. The high-frequency transducer shall  
be constructed of aluminium material with  
a proprietary BroadBeam® waveguide.  
Installation for the SM500i shall be by a  
proprietary & corrosion-resistant captured-  
ball mounting system. SoundTube’s tool-free  
captured ball mounting system incorporates  
a locking zinc alloy lever attaching to a cast-  
aluminum ball. For seismic & safety redun-  
dancy, a secondary aircraft cable shall be  
included and attached to the speaker chassis  
via #10 bolt. The external wiring input con-  
nector shall be a 4-pin, 5 mm Euroblock  
for 8 Ohm or distributed systems and shall  
accept from 10 – 22 gauge wire. The system  
shall be for indoor/outdoor applications and  
shall have a weather-resistant terminal boot  
covering all wire connectors.  
305.1 mm (12.01 in)  
Installation  
Unlocked  
Locked  
SoundTube’s SM500i is a surface-mount  
speaker designed to mount to a wall, pole,  
ceiling or other rigid structure. Vertical &  
horizontal pivoting offer unlimited aiming for  
indoor & outdoor applications.  
The enclosure shall be constructed of  
injection-molded, glass-reinforced ABS.  
The grille shall be constructed of iridite-plated,  
powder-coated aluminium for lasting  
performance.  
Optional Accessories  
Overall cabinet dimensions shall be no  
more than 316.9 mm (12.48 in) in height  
by 216.6 mm (8.53 in) in width by 305.1  
mm (12.01 in) in depth (including SM  
bracket). The SM500i shall include Euroblock  
connector & weather boot.  
The system shall be the SoundTube  
SM500i for both low & high impedance  
applications.  
U-Mount Bracket (AC-SM-UB5)  
Pole Mount Adaptor (AC-SM-PMA5)  
SoundTube Entertainment  
6430 North Business Park Loop  
Park City, Utah 84098  
Phone 435.647.9555  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
All SoundTube products come  
with a 5-year limited warranty.  
Bent Shaft (AC-SM-BS5)  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
 

Pelco Home Security System C1493SM User Manual
Philips Clock Radio XP AJ 3380 User Manual
Philips Electric Shaver YS524 User Manual
Philips Headphones SHM3200 User Manual
Philips Indoor Furnishings 220640 User Manual
Philips Indoor Furnishings Series 2 1 User Manual
Planar Battery Charger BAT 24CM User Manual
Porter Cable Nail Gun 8604 User Manual
Poulan Trimmer 545164151 User Manual
Powerware Tool Storage 9155 User Manual