Phase Technology Speaker PC 11 II User Manual

Premier Collection  
Owners Manual / Installation Instructions  
T
E
C
H
N
O
L
O
G
Y
PC-1.1 II, PC-3.1 II, PC-9.1  
PC-0.5, PC-1.5, PC-3.5, PC-33.5  
PC-SUB  
Thank you for selecting Phase Technology speakers. We know there are a wide variety of choices available today, and  
we sincerely appreciate your purchase of our product. Phase Technology speakers are built to exacting standards and  
will provide many years of listening enjoyment.  
Our speakers are the result of over ve decades of  
designing and manufacturing what many consider  
the nest sound reproduction products available. We  
hold several key patents in loudspeaker technology  
including the soft-dome tweeter. Our mission, our  
passion is to constantly advance the art and science  
of accurate audio reproduction. Our dedication  
insures your new speakers will accurately reproduce  
all the impact, detail and delicacy of today’s digital  
technology.  
Regardless of application, serious audiophile  
listening or home theater, we recommend that you  
take the time to read this manual thoroughly before  
connecting speakers to your amplier or receiver. In  
the highly unlikely event that you should experience  
a problem with set-up or operation, please contact  
one of our carefully chosen dealers for assistance, or  
contact us directly.  
We trust that your new Phase Technology speakers  
will enrich your enjoyment of music and movies  
beyond your expectations.  
PC-1.5 Piano Gloss Black  
CONTENTS:  
PC FEATURES:  
THANK YOU/CONTENTS  
SAFETY PRECAUTIONS  
1
2
3
3
4
5
6
7
Patented soft-dome midrange drivers and tweeters,  
patented solid-piston drivers and woofers, and Absolute  
Phase crossover networks all combine to produce  
accurate and lifelike music and video sound tracks.  
Absolute Phase crossovers not only allow a wider listening  
area than conventional crossovers, but they also insure  
that all the speakers in your home theater are in phase  
with one another to blend seamlessly together.  
GETTING STARTED AND PRECAUTIONARY NOTES  
TWO-CHANNEL STEREO SPEAKERS  
HOME THEATER SPEAKER SYSTEMS  
SPEAKER CONNECTIONS  
POWERED SUBWOOFER CONNECTIONS  
POWERED SUBWOOFER FEATURES  
SPECIAL PRODUCT FEATURES  
MAINTENANCE AND SERVICE  
9
10  
10  
SERVICE ISSUES AND WARRANTY  
Phase Technology Corporation 6400 Youngerman Circle Jacksonville, Florida 32244 1.888.PHASE TK www.phasetech.com  
 
GETTING STARTED AND PRECAUTIONARY NOTES  
For proper connection and therefore full enjoyment of your new Phase Technology speakers, we encourage you to  
read this owners’ manual thoroughly, even if you are very familiar with installing speakers and home entertainment  
equipment. We offer the following “getting started” guidelines and precautions.  
Speaker placement is very subjective, guided by personal considerations, and yet also follows the guidelines for  
the developers of multi-channel home entertainment systems. The proper spacing, location and adjustment of front,  
rear and center-channel speakers as well as subwoofers are critical for complete enjoyment of your new speakers.  
This manual covers those topics thoroughly.  
Before connecting your new speakers of other system components, turn the system power off and unplug your  
amplier to avoid any possibility of damaging power surges or unbalanced loads before the system is properly  
connected.  
Observe speaker polarity carefully! Every cable, speaker terminal and amplier connection are clearly marked to  
show their positive (+) and negative (-) polarities. For ideal system performance, always connect the positive side  
of the cable (marked with a stripe, color and /or other indicator) to the positive terminals on your speakers and  
amplier and the negative side of the cable to the negative terminals.  
Amplier selection is critical to your enjoyment of your new speakers. If you are considering upgrading your  
current component amplier or multi-function receiver, we suggest purchasing as much power as your budget can  
afford. It will always be preferable to have an affordable high-powered model with fewer “bells and whistles” than a  
lower-powered model straining to operate near its power limits.  
High volume settings that produce audible distortion – indicating an under-powered amplier – could eventually  
damage your speakers and your amplier.  
Begin and end listening sessions at low volume levels so you will not power up your system the next time with  
possibly harmful high voltages. A damaging surge also could result if you change the input source (from FM tuner to  
CD player, for example) at high volume levels.  
If you suspect that one channel of your amplier has failed, have it repaired immediately by your dealer. Damage  
to your speakers could occur if you switch between the good and defective channels.  
TWO-CHANNEL (STEREO) SPEAKERS  
Phase Technology audiophile speaker pairs for stereo applications can be affected by listening room geometry,  
furnishings and xtures. Experimentation with placing your new speakers in your unique listening environment will  
dictate how you arrive at the nal answer.  
We recommend starting the positioning process by selecting a favorite recording to use as the reference source.  
Place your new stereo speakers 1-3 feet away from rear and side walls and 6-8 feet apart. With bookshelf models,  
the tweeters (small, high-frequency drivers) should be positioned at about ear level when you’re seated in your  
favorite listening position.  
In most rectangular rooms, the speakers will sound best when placed along the short wall; but again,  
experimentation will provide the best answer. Move the speakers around slightly to determine any changes in sound  
balance and stereo imaging. Even try angling the speakers slightly toward your listening area. You may be surprised  
by the differences you will hear with even the slightest adjustments.  
Owners of Phase Technology speakers equipped with the company’s acclaimed variable-axis soft dome tweeter have  
additional latitude in speaker placement. Please see the Special Product Information note on manual page nine.  
3
 
HOME THEATER SPEAKER SYSTEMS  
Speaker Placement  
Today’s multi-channel home theater technology has elevated the art of “surround sound” to offer the exciting impact  
of the movie theater experience in your own home. Speaker requirements and placement are critical to reproduce  
these multi-media effects.  
Front speakers (left and right), rear speakers (left and right), and a center-channel speaker dene the minimum  
arrangement for multi-channel systems such as Dolby Pro Logic, DTS, and Dolby Digital (originally known as AC-3).  
It is recommended that all of these speakers be from the same company so they are matched in components and  
design and therefore as identical as possible in acoustic performance.  
For the ultimate in movie sound track impact and realism, a powered subwoofer is also strongly recommended.  
Some home theater enthusiasts use two subwoofers for truly impressive, oor-shaking effects.  
Powered subwoofers are large speakers, often 10-15” in diameter, with built-in power ampliers specically designed  
to reproduce bass frequencies from the lowest sound octaves. Powered subwoofers also reduce the strain on  
your other speakers by suing an electronic crossover network to channel these powerful bass frequencies to the  
subwoofer and, thus, away from the front, center-channel and rear speakers.  
To position your speakers, there are some general guidelines that take room size, shape, and xtures and  
furnishings into account. The following diagram illustrates typical speaker placement for surround-sound systems:  
SUBWOOFER  
CENTER SPEAKER  
RIGHT  
FRONT  
SPEAKER  
LEFT  
FRONT  
SPEAKER  
TELEVISION MONITOR  
MAIN LISTENING/VIEWING POSITION  
RIGHT REAR  
LEFT REAR  
SURROUND  
SPEAKER  
SURROUND  
SPEAKER  
or  
or  
Front speakers should be placed far enough apart (at least eight feet) to fully separate the left and right channels  
of sound, music, and/or dialogue. Whether oor-standing, on speaker stands, or placed on shelves, your speakers  
should be at or slightly above ear level.  
4
 
Rear surround speakers also should be placed at or slightly above your listening position for the best reproduction  
of surround-sound effects. Ideally, they should be facing into your favorite listening position from either side of the  
room, but placing them at the rear corners of the room facing front is also recommended.  
Center speaker placement should be, if possible, directly on top of or under your TV monitor or projection TV screen.  
This correctly positions the critical sound track information (usually dialogue) that lmmakers direct to the center  
channel. Phase Technology center speakers are magnetically shielded so that they will not interfere with your TV  
picture.  
Subwoofer placement is less critical, because the frequencies they reproduce are omni directional. This means the  
human ear doesn’t perceive these low frequencies as coming from a specic direction, enabling placement of a  
subwoofer virtually anywhere in the listening room.  
It’s best, however, to keep a subwoofer within the sound eld of the other speakers. The closer the subwoofer is to  
a wall, the louder and more intense its bass output will be: this effect is even stronger when the sub is placed in or  
near a room’s corner. If you must choose a less-than-ideal position, the output level of Phase Technology powered  
subwoofers is adjustable to compensate for your listening environment.  
CENTER CHANNEL  
LEFT FRONT  
SPEAKER  
RIGHT FRONT  
SPEAKER  
LEFT REAR  
SPEAKER  
RIGHT REAR  
SPEAKER  
MAIN  
REAR  
AMPLIFIER  
CENTER  
SPEAKER CONNECTIONS  
The following instructions apply whether you are using a separate amplier and other components or an integrated  
receiver. However, for simplicity we will use the term “amplier” throughout this manual to mean both. With system  
power off and your amplier unplugged, please follow these steps:  
Special Note: Observe Speaker Polarity Carefully!  
Every cable, speaker and amplier is clearly marked to show their positive (+) and negative (-) terminals. Amps and  
speakers may use some combination of these symbols and/or colors to indicate positive (usually red) and negative  
(usually black or white) connections. One strand of your cable will also be ridged and/or marked with a colored line  
or other indicator on the positive side  
5
 
For proper polarity and, thus, ideal system performance, always connect the positive side of the cable to the positive  
terminals on your speakers and amplier and the negative side of the cable to the negative terminals.  
Front Speakers: The pair of front speaker connections (left and right) on your amplier will be labeled “Front” or  
“Main.” Connect the speaker cables for your left and right front speakers using these terminals and then connect the  
cables to the speakers. Observe positive and negative polarities.  
Rear Speakers: The pair of rear speaker connections (left and right) on your amplier will be labeled “Rear” or  
“Surround.” Connect the speaker cables for your left and right rear speakers using these terminals and then connect  
the cables to the speakers. Observe positive and negative polarities.  
Center Speaker: The center speaker connections on your amplier will be labeled “Center” or “Center Channel.”  
Connect the speaker cables for your center channel speaker using these terminals and then connect the cables to  
the speaker. Observe positive and negative polarities.  
POWERED SUBWOOFER CONNECTIONS  
There are two ways to connect Phase Technology Powered Subwoofers to your system: through low-level and high-  
level connections. These methods differ depending on whether you are using components or a multi-purpose  
receiver; whether your amplier, receiver, and surround-sound decoder have separate subwoofer output connections;  
and whether you are using one or two subwoofers in your system.  
Therefore, please read the following guidelines carefully. Be sure to choose one or the other of the connection  
options, as using both at the same time could severely damage your speakers and amplier. And always remember  
to keep the polarity connections correct (positive to positive and negative to negative).  
To prevent low-frequency information from being fed to your main speakers, we recommend connecting your  
front speakers directly to the subwoofer using the sub’s own high-level-output speaker terminals. This method of  
connection reduces the stress on the main speakers; it requires using the high-level connection guidelines below for  
your subwoofer(s).  
After your powered subwoofer is properly connected, plug it in to AC power and turn the subwoofer’s own level control  
all the way down, counter-clockwise, before activating the subwoofer’s power switch. Then, gradually increase the  
volume level while playing music you are familiar with until the bass level is to your liking.  
Special Note: System Adjustment for Low-Level Connections  
When using a subwoofer that is connected to your amplier through the low-level inputs, it is recommended that  
your surround-sound processor (or multi-channel amplier) be set, if possible, to enable a low –frequency roll-off for  
your full-range speakers.  
This adjustment, sometimes labeled “small speakers” will enable a smoother crossover transition between your  
primary speakers and the subwoofer.  
Single Subwoofer with Low-Level Connection:  
Use this method if 1) you use a separate preamplier and power amplier, 2) if you use a receiver with preamplier  
outputs and/or subwoofer output jacks, or 3) if you use a separate surround-sound decoder with your amplier.  
Use a pair of audio-interconnect cables – the ones with the colored RCA plugs – to connect the left and right outputs  
of your pre-amplier or surround decoder to the left and right low-level inputs of your powered subwoofer. Connect  
your front, center-channel and rear speakers to our amplier as previously outlined in this manual.  
6
 
If you are using equipment that has only one monaural subwoofer-output jack, you may make the connection  
between this jack and the left or right low-level input of the powered subwoofer. If more volume is desired even after  
increasing the subwoofer’s separate level control, use a “Y” audio connector to connect both the left and right low-  
level subwoofer inputs to the single monaural subwoofer output jack.  
Dual Subwoofers with Low-Level Connection:  
When using two powered subwoofers, or will be connected to the right channel and the other to the left channel. This  
requires using RCA audio cables to connect the left output of your preamp or decoder to the left low-level input on  
the subwoofer that you are designating as the left-channel sub.  
Repeat this process for either subwoofer, using the right-channel low-level outputs and right-channel low-level inputs  
of the subwoofer.  
Single Subwoofer with High-Level Connection:  
You will be connecting your subwoofer directly to your amplier’s main speaker outputs with this method and then  
conne3cting your speakers to the subwoofer’s outputs.  
To do so, connect the left-channel main speaker output of your amplier to the high-level left-channel input terminals  
of the subwoofer. Then connect the left main speaker to the left-channel output on the subwoofer. Repeat this  
process for the right channel. We suggest using good-quality, heavy-gauge cables for the amplier-to-subwoofer-to-  
speaker connections.  
Dual Subwoofers with High-Level Connection:  
Connect the left-channel speaker terminals of your amplier to the high-level, left-channel input terminals of the  
subwoofer that you are using for the left channel. Repeat the process for the right-channel subwoofer, using the  
right-channel outputs and inputs.  
Now connect your main left and right speakers directly to your subwoofer speaker outputs. Your center and rear  
speakers are connected to your amplier as normal.  
Alternate Subwoofer High-Level Connection:  
With some system congurations it may not be convenient to connect the main loudspeakers through the subwoofer  
high-level outputs. Under these conditions, an alternate connection method may be used. To accomplish this,  
connect the left-channel speaker level input of your subwoofer to the left-channel speaker output of your amplier.  
Repeat the process for the right-channel connections of your subwoofer and the main right-channel speaker. This  
means that you are connecting the subwoofer high-level inputs in parallel with the connections for your main  
speakers. (See diagram alternate connection 2.)  
POWERED SUBWOOFER FEATURES  
Subwoofer Connections with High-Pass Filters: Phase Technology powered subwoofers are equipped with internal  
high-pass crossovers providing a -6 dB per octave slope for the high-level outputs.  
Some premium models also feature an active crossover with -24 dB per octave slope for its low-level output. (Refer  
to the specications for your model.)  
When using these low-level outputs, it is necessary to have either separate preamp inputs and outputs or separate  
component ampliers, preampliers or decoders. The low-level inputs should be connected as noted in this manual.  
The low-level outputs from the subwoofer must be connected back to a preamplier, a decoder, or main amplier  
inputs with standard RCA-type connecting cables. Be certain to connect the respective left- and right-channel inputs  
and outputs as noted.  
7
 
LOW-LEVEL SUBWOOFER HOOK-UP  
INPUT OUTPUT  
OPTIONAL PRE/  
MAIN AMP  
HOOK-UP FOR  
SOME MODELS  
LINE  
OUT  
LINE  
IN  
L
R
SUBWOOFER/  
AMPLIFIER  
L
R
INPUT  
OUTPUT  
HIGH-LEVEL SUBWOOFER HOOK-UP  
AMPLIFIER MAIN  
SPEAKER OUTPUTS  
RIGHT SPEAKER  
LEFT SPEAKER  
2
2
L
R
LINE  
OUT  
LINE  
IN  
L
R
SUBWOOFER/  
AMPLIFIER  
L
R
INPUT  
1
1
OUTPUT  
NOTE: Connect main left and right  
speakers by either method #1 or #2  
but not both.  
1.  
2.  
PREFERRED CONNECTION  
ALTERNATE CONNECTION  
8
 
Automatic Power Circuitry: This feature activates your subwoofer whenever it senses a signal (any music source)  
coming from your amplier. The same circuit will automatically shut power off to your subwoofer about ten minutes  
after you turn off your main amplier. This means you may always leave your subwoofer’s power switch on.  
Level Control: A precision level control is built into your subwoofer to enable volume adjustment of the bass  
frequencies. Set the level according to your personal preferences from signicant bass response, as might be  
preferred in home theater listening, to the softer, more natural presence that might be the choice for enjoying  
musical programming.  
Crossover Point Control: Phase Technology Powered Subwoofers also feature internal crossover networks designed  
to enable the subs to be acoustically matched to virtually any pair of full-range speakers.  
The adjustable crossover control on the subwoofer’s back panel should be set near the low-frequency roll-off point  
of our front speakers. The specications listed for your main speakers will generally specify this point as a “-3  
dB” frequency. It’s important to trust your ears when setting this control. Too high a setting will exaggerate bass  
response, while too low a setting could produce weak bass.  
When using low-level connections on certain Phase Technology premium subwoofers, the network controls both the  
low-pass and high-pass crossover points with matched slopes for uniform frequency response. (Please refer to the  
specications included with your subwoofer.)  
Servo Control: This innovative feature protects your Phase Technology powered subwoofer from being over-driven  
and, thus, producing unnecessary distortion. It automatically limits the subwoofer’s loudness and excessive  
movement of the speaker cone in the unlikely event that the demands of your program material exceed the capacity  
of the subwoofer’s internal amplier and speaker.  
Phase Control: This feature enables setting the subwoofer’s phase at two positions, which may be labeled “+” or  
“-” or “0” or “180.” We suggest starting with the control at the “+” or “0” position with someone else adjusting  
the control while you listen from where you normally sit. One of the settings will produce a fuller, more robust bass  
response, and the Phase Control should be left in that position.  
SPECIAL PRODUCT FEATURES  
Adjusting Variable-Axis, Soft-Dome Tweeters  
Some Phase Technology speakers feature the company’s acclaimed variable-axis soft-dome tweeter (refer to the  
model specications included with your speakers) offering even greater latitude in selecting speaker locations and  
listening positions.  
This revolutionary tweeter can be adjusted by hand to direct the high frequencies towards a specic listening area  
for optimal tonal balance and channel separation. This enables owners of these Phase Technology models to place  
the speakers where they look or t best and then aim the tweeter for best effect.  
When adjusting these units, be careful to press on the outer rims only, avoiding contact with the center, or soft  
dome, of the speaker. A series of adjustments may be necessary to achieve the ideal clarity and smoothness of the  
high frequencies that the variable-axis soft-dome tweeter was designed to present.  
Bi-Wired Connections  
Some Phase Technology premium audiophile speakers are equipped for be-wiring, with four speaker terminals  
instead of two. This may enhance speaker performance by using an additional pair of speaker cables.  
In order to bi-wire these speakers, remove the gold-plated strips between the speaker terminals and connect two  
9
 
cables between your amplier’s positive output terminal and the two positive (red) terminals on the speaker. Then  
connect the other two cables between the amp’s negative output terminal and the two negative (black) terminals on  
the speakers.  
If you chose not to bi-wire your speakers, do not remove the metal strips between the speaker terminals. Connect  
each cable in the standard manner, with one cable each between the positive and negative speaker terminals and  
your amplier.  
Floor Spikes  
Floor spikes may have been provided with your new Phase Technology speakers to steady the speaker cabinets,  
especially on carpeting and uneven oor surfaces. Because most speakers tend to rock back and forth in small  
increments due to the force of the in/out motions of speaker drivers, these movements can affect the speakers’  
performance.  
Attach the oor spikes by screwing them into the pre-drilled holes in the base of the speaker and tighten the nuts  
securely. The sharp points will penetrate the carpet to make a more solid contract with the underlying oor surface.  
If your oor is not rigid, the spikes may actually add to the rocking motion, so we recommend you audition the  
speakers with and without the spikes inserted to see if you discover a personal preference in the sound quality.  
Be especially careful when moving speaker cabinets with the spikes attached, as the points could damage  
carpeting or scratch oors.  
MAINTENANCE AND SERVICE  
Care for Your Speaker Cabinetry  
All Phase Technology speakers are nished with a high degree of craftsmanship in either wood veneers or vinyl  
laminates. We recommend using a ne-quality furniture polish to maintain the long-lasting beauty of weed veneers.  
Avoid products containing silicones, oils, or oil derivatives. Enclosures nished in vinyl laminates may be cleaned  
with a damp cloth as necessary.  
Some Advice About Ampliers  
If you are considering upgrading your amplier, we offer this advice: Purchase as much power as your budget  
permits. It will always be better to have an affordable higher-powered amplier with fewer “bells and whistles” than a  
lower powered model straining to operate near its power limits.  
Critical questions about your current system – its power ratings, the number of speakers it can drive, future  
expansion capabilities, and compatibility with multi-channel surround-sound systems – should be directed to your  
Phase Technology dealer.  
SERVICE ISSUES AND WARRANTY  
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever  
need service if connected and used as outlined in this Owners’ Manual.  
In the unlikely event that a problem does occur, please contact your Phase Technology dealer. Your dealer has  
the necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original  
performance specications. Please refer to the warranty card included with your new Phase Technology  
loudspeakers.  
10  
 
Please not that repairs made by an unauthorized service agency will void your Phase Technology warranty. There are  
no user-serviceable parts inside your speakers and opening speaker cabinets also will void your warranty. Also be  
advised that opening a powered subwoofer can present the risk of electrical shock.  
FOR YOUR RECORDS  
Please use this space to record information about your purchase in the event you  
need assistance in the future.  
Model  
Serial #  
Retailer Name  
Date of Purchase  
Retailer Phone  
Phase Technology Corporation  
6400 Youngerman Circle  
Jacksonville, Florida 32244 1.888.PHASE TK www.phasetech.com  
11  
 

Pelco Security Camera C2941M User Manual
Pfaff Sewing Machine 141 User Manual
Philips Portable DVD Player PET101 User Manual
Pioneer CD Player CDJ 800MK2 User Manual
Pioneer DVR DVR LX70 User Manual
Pioneer TV Receiver VSX 54TX User Manual
Poulan Trimmer 545212832 User Manual
Presto Fryer GranPappy User Manual
Prince Castle Outdoor Timer 740 T12 User Manual
PYLE Audio Car Stereo System PLDVD140 User Manual